Cisco System Model: Fault fltIpv6NexthopIpv6CfgCtrl
Cisco System Model: Class ifc:eventmgr:fltIpv6NexthopIpv6CfgCtrl
This pages provides an overview over ACI Fault: F1604
Explanation: This fault is caused by a hardware programming failure
Recommended Action: The system will periodically retry to program the hardware. If the failure is due to lack of hardware resources, free up resources by removing or simplifying existing configuration. One of the reasons for lack of hardware resources is exhaustion of VLANs in ToR. These hardware resources can be examined by looking at capacity dashboard under OPERATIONS tab. Please check entry against the number of VLANs in output of command show vlan summary issued at node where fault is generated to check whether it exceeds above advertised node capacity.
Raised on MO: ipv6:Nexthop
Fault Name: fltIpv6NexthopIpv6CfgCtrl
Unqualified API Name: ipv6CfgCtrl
Code: F1604
Applied Mo DN Format
- topology/pod-[id]/node-[id]/sys/ipv6/inst/dom-[name]/rt-[prefix]/nh-[nhIf]-addr-[nhAddr]-vrf-[nhVrf]
- sys/ipv6/inst/dom-[name]/rt-[prefix]/nh-[nhIf]-addr-[nhAddr]-vrf-[nhVrf]
Type: config
Cause: config-failure
Severity: warning
Weight: 100
Tags:
Message: None
Help: None
Triggered By: ipv6CfgState not equals 0
